* QCRYPTO (Qualcomm Crypto)

Required properties:
  - compatible : should be "qcom,qcrypto"
  - reg : should contain crypto, BAM register map.
  - reg-names : should contain the crypto and bam base register names.
  - interrupts : should contain crypto BAM interrupt.
  - qcom,bam-pipe-pair : should contain crypto BAM pipe pair index.
  - qcom,ce-hw-instance : should contain crypto HW instance.
  - qcom,msm_bus,name: Should be "qcrypto-noc"
  - qcom,msm_bus,num_cases: Depends on the use cases for bus scaling
  - qcom,msm_bus,active-only: Boolean flag for context of request (actve/dual)
  - qcom,msm_bus,num_paths: The paths for source and destination ports
  - qcom,msm_bus,vectors: Vectors for bus topology.
  - qcom,ce-device: Device number.

Optional properties:
  - qcom,ce-hw-shared : optional, indicates if the hardware is shared between EE.
  - qcom,ce-hw-key : optional, indicates if the hardware supports use of HW KEY.
  - qcom,use-sw-aes-cbc-ecb-ctr-algo : optional, indicates if use SW aes-cbc/ecb/ctr algorithm.
  - qcom,use-sw-aes-xts-algo : optional, indicates if use SW aes-xts algorithm.
  - qcom,use-sw-aead-algo : optional, indicates if use SW aead algorithm.
  - qcom,use-sw-ahash-algo : optional, indicates if use SW hash algorithm.
  - qcom,use-sw-hmac-algo : optional, indicates if use SW hmac algorithm.
  - qcom,use-sw-aes-ccm-algo : optional, indicates if use SW aes-ccm algorithm.
  - qcom,clk-mgmt-sus-res : optional, indicate if the ce clocks need to be disabled/enabled in suspend/resume function.

Example:

        qcom,qcrypto@fd444000 {
		compatible = "qcom,qcrypto";
		reg = <0xfd440000 0x20000>,
		      <0xfd444000 0x8000>;
		reg-names = "crypto-base","crypto-bam-base";
		interrupts = <0 235 0>;
		qcom,bam-pipe-pair = <1>;
		qcom,ce-hw-instance = <1>;
		qcom,ce-device = <0>;
		qcom,ce-hw-shared;
                qcom,msm-bus,name = "qcrypto-noc";
		qcom,msm-bus,num-cases = <2>;
		qcom,msm-bus,num-paths = <1>;
		qcom,msm-bus,vectors-KBps =
				<56 512 0 0>,
				<56 512 3936000 393600>,
	};
